447 www.glenair.com e-mail: sales@glenair.com series 447 - page 12 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2005 glenair, inc. printed in u.s.a. cage code 06324 connector designators a-b * -c-d-e-f g-h-j-k-l-s * conn. desig. b see note 4 direct coupling 447-426 emi/rfi non-environmental band-in-a-can backshell with cable clamp strain-relief direct coupling - standard profile 447 f s 426 nf 16 12-8 k p product series connector designator angle and profile h = 45 j = 90 s = straight basic part no. finish (table ii) polysulfide (omit for none) b = band k = precoiled band (omit for none) length: s only (1/2 inch increments, e.g. 8 = 4.000 inches) cable entry (table v) shell size (table i) e (table iv) f (table iv) g (table iv) h (table iv) a thread (table i) b (table i) length .060 (1.52) min. order length 2.5 inch (note 3) termination area free of cadmium knurl or ridges mfr's option polysulfide stripes p option style 2 (straight see note 1) length .060 (1.52) min. order length 3.0 inch (see note 3) j (table iii) j (table iii) .500 (12.7) max k ** cable range l ** ** (table v) b (table i) b (table i) band option (k option shown - see note 5)
447 www.glenair.com e-mail: sales@glenair.com series 447 - page 13 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2005 glenair, inc. printed in u.s.a. cage code 06324 1. when maximum cable entry (page 22) is exceeded, style 2 will be supplied. (function s only). 2. metric dimensions (mm) are indicated in parentheses. 3. consult factory for shorter lengths on straight backshells. 4. when using connector designator b refer to pages 18 and 19 for part number development. 5. backshells supplied with 600-052-* band, see glenair series 600 tool catalog for installation. see inside back cover fold-out or pages 13 and 14 for tables i and ii. table v: cable range dash no. 10 12 14 16 18 20 22 24 28 32 k .030 (.8) .220 (5.6) .310 (7.9) .440 (11.2) .560 (14.2) .630 (16.0) .750 (19.1) .880 (22.4) 1.000 (25.4) 1.060 (26.9) 1.190 (30.2) min .130 (3.3) .250 (6.4) .310 (7.9) .375 (9.5) .560 (14.2) .630 (16.0) .750 (19.1) .880 (22.4) 1.000 (25.4) 1.130 (28.7) max .250 (6.4) .380 (9.7) .440 (11.2) .630 (16.0) .690 (17.5) .750 (19.1) .880 (22.4) 1.000 (25.4) 1.130 (28.7) 1.250 (31.8) l max 1.000 (25.4) 1.250 (31.8) 1.340 (34.0) 1.470 (37.3) 1.560 (39.6) 1.620 (41.1) 1.750 (44.5) 1.870 (47.5) 1.970 (50.0) 2.090 (53.1) cable range 447-426 emi/rfi non-environmental band-in-a-can backshell with cable clamp strain-relief direct coupling - standard profile table iv: elbow dimensions g max .810 (20.6) .870 (22.1) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) h max 1.550 (39.4) 1.610 (40.9) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) 2.210 (56.1) e max .664 (16.9) .688 (17.5) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) elbow size 10/12 14 16/18 20 22 24 28 32 f max 1.410 (35.8) 1.430 (36.3) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) 1.750 (44.5) shell size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 a-e-f j-h-l-s 1.180 (30.0) 1.180 (30.0) 1.180 (30.0) 1.180 (30.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.610 (40.9) 1.610 (40.9) 1.610 (40.9) 1.610 (40.9) d-b-g-k 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.750 (44.5) 1.750 (44.5) 2.190 (55.6) j max - conn. designator table iii: front adapter c 1.735 (44.1) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6)
|
